Part Number Hot Search : 
F4718 V470M SI7115DN C7020 00850 SR220 E003586 MM3142DN
Product Description
Full Text Search
 

To Download AB-A3DBXXX Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  lvds uhf vcxo AB-A3DBXXX series description the AB-A3DBXXX series of voltage controlled crystal oscillators (vcxo) provides ultra high frequency with lvds complementary outputs. the outputs can be disabled for test automation or combining multiple clocks. the device is based on low noise analog harmonic frequenc y multiplication, providing exceptionally low phase noise and jitter. it is packaged in a miniature, fr-4 based 9x14mm smd package. applications and features ? wide frequency range ? 200.0mhz to 1.000ghz ? fiber channel; 10 gbe; infiniband; network processors; sonet/sdh ? high reliability - nel halt/hass qualified for crystal oscillator start-up conditions ? extremely low phase noise and jitter ? high shock resistance, to 1000g ? absolute pull range (apr) to 1000 ppm ? sonet 20 ppm overall free-run stability available ? rohs compliant, lead free construction 357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com crystal clock oscillators data sheet 0630a rev. b ab - a 3db x x x - freq package code absolute pull range, ppm ab 6 pad 9x14 mm smd e 20 f 32 input voltage g 50 a 3.3v5% h 100 9 customer specific enable option temperature range, c h positive cmos enable a 0 to 50 n n/a b 0 to 70 c -20 to 70 d -40 to 85 9 customer specific creating a part number
AB-A3DBXXX series continued lvds uhf vcxo absolute maximum ratings parameter symbol value unit operating temperature range to -40 to +85 oc storage temperature range tst -50 to +90 oc supply voltage vcc -0.5 to 4.5 v enable/disable voltage ven/dis 0 to vcc v electrical parameters parameter symb conditions, note min typ max unit nominal frequency fo 200 1000 mhz supply voltage vcc code a 3.135 3.3 3.465 v supply current icc 50 60 ma output logic type lvds load at receiving end between the outputs 90 100 110 ohm output levels vod differential amplitude 247 330 454 mv amplitude error 50 mv vof offset voltage 1.125 1.25 1.375 v offset voltage error 50 mv duty cycle (symmetry) at outputs crossing, room temperature 45/55 50/50 55/45 % rise/fall time tr/tf 20 to 80, 80 to 20 % 0.5 0.7 ns jitter integrated j integrated from phase noise, 12 khz to 20 mhz , rms 0.1 0.2 ps 100 hz to 80 khz, rms 1.0 ps 50 khz to 80 mhz 0.3 ps wavecrest characterized random period, 2.5 ps accumul., pk- to-pk 25 ps deterministic 1 ps sub-harmonics @ 622.08mhz -50 -46 dbc phase noise ( f) 622.08 mhz, apr 50ppm or less @ 10 hz @100 hz @1 khz @10khz @100khz @>1mhz -60 -90 -118 -135 -135 -140 -55 -85 -113 -130 -130 -135 dbc/hz frequency stability f/f overall, including initial calibration, temperature, aging 10 years, shock and vibration @ vc=vcc/2; apr 50ppm, or less 20 30 ppm control voltage range vc 0v vcc v setability vcs vc to set f at fo; t, vcc, load - nominal, as shipped 0.4 vcc 0.5 vcc 0.6 vcc v absolute pull range apr over all conditions, see part # creation 20,32, 50,100 ppm input impedance zin @ fmod < 100 khz 50 kohm modulation bandwidth at vc = vcc/2, -3db 20 khz enable/disable option pin 2 enabled pin 2 disabled cmos logic 1 or n/c cmos logic 0 0.7 vcc 0 vcc 0.3 vcc v 357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com rev. b crystal clock oscillators data sheet 0630a
rev. b crystal clock oscillators 0.55 (14 m m ) 0.35 (9 m m ) 0.24 (6.1 mm) 0.200 (5.08 m m ) 0.300 (7.62 m m ) 1 2 3 4 5 6 0.045 (1.14 m m ) 0.050 (1.27 m m ) 0.200 (10.2 m m ) 0.100 (5.1 m m ) 0.060 (1.52 m m ) recommended pad layout AB-A3DBXXX series lvds hf vcxo continued electrical connection pin connection 1 vco 2 enable/disable 3 gnd 4 output 5 output complement 6 v cc environmental and mechanical characteristics operating temp. range see part # table mechanical shock per mil-std-202, method 213, cond. e thermal shock per mil-std-883, method 1011, cond. a vibration per mil-std-883, method 2007, cond. a hermetic seal leak rate less than 1x10 -8 atm.cc/s of helium soldering conditions see max reflow profile below maximum reflow profile 357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com


▲Up To Search▲   

 
Price & Availability of AB-A3DBXXX

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X